For inspection teams already delivering 3D

Automated Data Processing Services for Infrastructure Inspection

Turn every collection into high-quality, inspection-ready 3D. PhotoMesh Production Service runs a processing workflow configured to your requirements, tuned with our engineers, and automatically aligned to your previous production, so every inspection cycle builds on the last.
High-quality outputs, even from imperfect collections
Any 2D & 3D output tailored to your workflow
Enhanced accuracy with automatic GCPs and alignment to existing projects
A service that scales up or down with your workload

 The Problem

You capture great data.
Every collection should count.

Your crews do the hard part. They capture the tower, bridge, line or plant and come back with the data.
That’s why it’s so frustrating when:

01

A project doesn’t come out as a good model, and someone has to re-run it or go back to site.

02

Complex structures like lattice towers, bridge undersides and substations don’t reconstruct cleanly.

03

Antennas, cables, mounts and insulators come out broken or missing, even though those are exactly the details your client is paying to see.

04

This cycle’s capture won’t line up with the last one,
so comparing the two becomes a manual project.

The good news is that none of this has to come with the job. You can get more out of every collection and keep more of every contract.

Why Inspection Teams Choose PhotoMesh Production Service

Photogrammetry processing services built around inspection output

High-quality outputs, project after project

PhotoMesh Production Service delivers complete, detailed and accurate models, even from imperfect collections. PhotoMesh is tuned to your data and reconstructs the hard parts: poles, cables and antenna mounts. You get 3D mesh, Gaussian Splatting, point clouds, true orthophotos and DSM/DTM.

 

A workflow configured to your requirements

The engine is the same; the workflow is not. We configure accuracy settings, outputs and delivery to your requirements and specifications, whether that’s tower equipment inventory, recurring bridge documentation or corridor mapping for power lines.

Engineers who tune it with you

Switching providers shouldn’t mean starting from zero. Our technical specialists review your inputs and capture settings, identify what’s holding back quality, and tune the workflow with your team until output meets your standard.

Automatic alignment to your previous production

Inspection is recurring. Each new collection is aligned geographically to a reference source, such as your previous production, existing 3D layers or LiDAR, so successive models of the same asset line up. Change detection becomes a comparison, not a manual reconstruction exercise.

A fully automated, scalable service

PhotoMesh Production Service runs on SkylineCloud and is fully automated through a REST API. It reads your data from your cloud storage (AWS, Google Cloud, Azure and others) and returns results there, or publishes them to SkylineCloud Hosting. Scale up for large projects and down when it’s quiet, so you only pay for what you need. If your clients require it, PhotoMesh can also run on your own infrastructure.

From processing to a shareable link, all in one place

When processing finishes, results publish directly to SkylineGlobe Server. You get a link to the hosted results that you can share with your team or your clients. There’s no export and re-upload step, because Skyline handles the whole process.

Use Cases

Cell tower inspection and inventory

Build a cell tower digital twin that shows what equipment is on the tower, where each panel faces and how much space is left. Tower owners use it to manage inventory and plan new tenants. You deliver it from the same flight you already fly.

Bridge inspection

US federal standards (NBIS) set routine bridge inspections at intervals of up to 24 months. A bridge inspection 3D model captured each cycle and aligned to the last gives inspectors a consistent, repeatable record of the structure over time.

Property assessment

Transform aerial and ground imagery into measurable 3D digital twins that help insurers accurately assess property characteristics and risks. Evaluate building dimensions, roof condition, surrounding trees, and other site features, while using the 3D data to feed AI models for automated property analysis.

Also used for:

How It Works

From collection to aligned, inspection-ready 3D in four steps

01

Ingest

Connect your cloud storage or upload photos, LiDAR or video, from one drone, an aircraft or a full fleet.

02

Align

The new collection is aligned to your previous production, so this cycle’s model lines up with the last one.

03

Process

PhotoMesh produces 3D mesh, Gaussian Splatting, point clouds, true orthophotos and DSM/DTM, automatically, using the workflow configured for your requirements.

04

Deliver

Check any point against its source photos with Photo Inspector. Receive results in 3DML, OGC 3D Tiles, I3S/SLPK, LAS/LAZ or GeoTIFF, delivered to your storage or aligned to your previous projects.

Powered by PhotoMesh

The engine behind the service

Behind the service runs PhotoMesh, Skyline’s photogrammetry engine. As a managed service it scales from a single asset to large-area projects, across up to thousands of machines. Everything on this page is PhotoMesh configured for inspection production.

Frequently asked questions

Automated drone data processing turns raw drone images into 3D models, orthophotos and other outputs without an operator managing each step. With Skyline, ingestion, aerotriangulation, reconstruction and delivery run as one unattended pipeline, so your throughput depends on your hardware, not on how many jobs your team can supervise.
Because the real cost is how many of your projects fail to produce a model you can deliver. Skyline configures a pipeline to your sector, tunes it with your team to get the best model quality even from imperfect captures, and aligns each new capture to the last one. The goal is a higher project success rate from the same flights, with cycle-over-cycle comparison built in.
Project success rate is the share of your projects that produce a good-quality 3D model. Every project that fails is flight time you paid for and cannot bill, and often a return trip to the site. Because field data is rarely perfect, success depends on how well the processing pipeline handles real-world captures, not on flying a perfect mission every time.
PhotoMesh can align a new capture to a reference source, such as a previous project, existing 3D layers or LiDAR. Successive models of the same asset register against each other, so you can compare inspection cycles, detect change and measure differences without rebuilding alignment manually for every visit.

Yes. Thin features such as poles, cables, antenna mounts and steel lattice are where reconstruction most often fails. PhotoMesh supports both mesh and Gaussian Splatting output, and Gaussian Splatting captures fine details like cables and poles that mesh-only pipelines can struggle to represent. Our engineers can also tune settings to your captures.

US federal standards (NBIS) set routine bridge inspections at intervals of up to 24 months. They do not require 3D models, and 3D does not replace a qualified inspector. What an aligned 3D model adds is a consistent, photo-traceable record of the structure that supports your inspection program across cycles.

TerraExplorer’s Photo Inspector displays the actual source photos behind any part of the model, so every point is traceable to its origin. When a client’s engineer questions a measurement, you can show the exact images it came from, which makes your deliverable measurable and defensible for engineering sign-off.
No and no. PhotoMesh processes projects with hundreds of thousands of images, with no cap that forces you to split large flights. Skyline is licensed software rather than consumption-billed, so there are no credits and no charges for failed jobs. You know your processing cost before you bid.
Yes. The full pipeline can run on-premises, in a private cloud, in a hybrid setup, or in fully air-gapped environments with no cloud dependency. This matters when your clients, such as tower owners, utilities or public agencies, have strict rules about where inspection data is stored and processed.
It depends on the job. Asset inventory, engineering design and utility network management usually need survey-grade positioning from RTK, PPK or ground control points. Routine condition monitoring needs something different: repeat surveys aligned tightly to each other, even where the project carries a small shared offset from absolute coordinates.
Yes. We can process existing drone imagery, mobile mapping runs, aerial photography and LiDAR collections. Final quality depends on the coverage and quality of the original capture, and our engineers customize the pipeline to get the best possible model from collections that aren’t perfect. Confirm your sensors and file formats with us first.
You share a recent dataset, ideally one your current tool struggled with. For the pilot, our engineers build the model hands-on, so you see the quality we can reach on your data before a production pipeline is configured for your sector. We agree the scope of each pilot with you, based on your program. You decide based on your own data.
Bring the flight your current tool struggled with

Bring the flight your current tool struggled with​

The fastest way to see the difference is your own data. Send us a recent tower or bridge capture, ideally one your current tool struggled to turn into a good model, and we will show you the 3D quality we can reach with it.