Viewing Aerotriangulation (AT) Tiles

To view aerotriangulation tiles:

Note:    This information is also available in the AT Tiles list. See "Selecting Tiles" and "Viewing Tile Information in the Tile List" in this chapter for information.

1.     In the Project Tree, select the AT Tiles check box. The aerotriangulation tiles are displayed in the 3D Window, colorized according to their aerotriangulation status:

§  White tile – Unprocessed

§  Purple tile – Aerotriangulation completed

§  Yellow tile – Aerotriangulation merged

§  Orange border – Aerotriangulation failed (retrying)

§  Red border – Aerotriangulation failed

§  Blue border - <80% Success

Note:        In the AT Tiles legend, the colored squares (e.g. ) indicate colored tiles, while the colored lines (e.g. ) indicate a colored border.

2.     If you hover anywhere on the tile, the tile's name and number of photos in the tile are displayed at the top left corner of the 3D Window.

3.     In the 3D Window, click the tile you want to review, or select the tile in the Tiles List. The Tile tab is displayed from which you can navigate to the tile, display its original and calculated camera positions and sparse point cloud, and view quality reports. See "Navigating to a Tile", "Displaying Original Camera Positions for Tiles", "Displaying Calculated Camera Positions for Tiles", "Viewing an Aerotriangulation Tile’s Sparse Point Cloud" and "Viewing a Production Report" in this chapter for information.